FAQ

Q:  Is window tinting a fairly new process?

A:  No! Window film for use in Solar control flat glass application (buildings) dates back to the early 1960s.

Q: How long will it take to tint my car windows?

A: The installation time depends on the installer’s experience and the expected quality of the finished product. A single installer should be able to tint 90 percent of the vehicle’s windows within one to three hours.

Q: Why does film bubble?

A: Film bubbles because it is of poor quality and the result of a failure in the adhesive process.

Q: Why does auto window film turn purple?

A: Inexpensive window film consists of polyester film dyed to achieve the desired color and darkness. The purple appearance is caused when the ultraviolet rays from the sun break down the dyes in poor quality film. 

Q: Is there only one shade of film to choose from?

A: No! There are a wide selection of colors and shades with different light transmission levels to satisfy local tint laws. Our professional tinters will help you select the perfect professional grade film for your car, truck, or van from our 3M Prestige Series of window film.

Q: What is window film?

A: 3M is a high quality thin, multi-layered piece of optically clear film that is retrofitted to the inside surface of glass. Our 3M Prestige Series is Nano-Technology Construction. Clearly superior. Prestige Series window films use non- metalized nano-technology to create reflectivity that’s actually lower than glass. “Our window films provide superior technology, keeping heat out, while letting natural light in.

Q: “I’m worried about my child in the rear seat. It gets so hot, and I always see her squinting when I look in the rear view mirror.”

A: 3M film will reduce heat by up to 97%. It will block out 99% of the sun’s harmful rays. And it can also substantially reduce glare depending upon the shade of film you choose.

Q: Can the window tint be scratched?

A: There is a scratch resistant coating on the film. However, the film can be scratched or punctured with keys, watches, rings, safety belt buckles, etc. Scratches caused by user neglect are not covered by warranty. Take care when unbuckling your seat belt.

Q: Can I roll my windows down once window film has been applied?

A: You must wait 48 hours before rolling windows down.

Q: How much does window tinting cost?

A: Prices will range from $100 to $400 per install. Remember, you are not only paying for the film product but for the installation time and quality of workmanship.

Q: What is the curing process?

A: Curing is the time it takes for the water and adhesive to interact with each other and create a complete adhesion with the window glass. Please allow 48 hour to pass before rolling down windows.

Q: How long is the curing process?

A: It can take between 7 to 28 days for a complete cure. Depending on weather and temperature.

Q: How should I clean the inside of the windows?

A: You should clean your film with dishwashing soap and water. None ammonia cleaning product can be bought at most retail stores.

Why Choose Us?

  • Family Owned and Operated with 30+ Years Experience
  • High Quality Products Such as 3M, Xpel, Ceramic Pro
  • Certified Installers
  • Highest Integrity
  • Customer Satisfaction Guaranteed Every Time
  • Over 6,000 Satisfied Customers and Still Counting
  • All of Our Customers Refer us to their Family and Friend's

 

Enjoy our Photo Gallery

If a question has not been answered on this page, then please feel free to contact us by using our contact form on this website, or phone us directly at: (209) 543-3800. Thank you!

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.